Tubing Inspection Borescope

Borescopes for Tubing Inspection

Remote Videoscope Tubing Inspection Challenges

Tubing Inspection Borescope, Tubing Inspection Videoscope, Borescope Inspection of Tubing and Heat Exchangers

Tubing Inspection BORESCOPES

Remote Videoscope Tubing Inspection Challenges.

RVI (Remove Visual Inspection) of pharmaceutical, food or chemical processing equipment, especially tubing inspection, can help to intercept potential problems long before they become a serious threat to the production. Tubing requires a smooth flow to pass a fluid or material. Any obstruction, cracks in the sidewalls or FOD (Foreign Object Debris) will prevent proper flow.

The efficiency of your heat exchanger, boiler or condenser tubes can be adversely affected by corrosion, pitting, loose debris, or leakage. There is and urgent need for means to quickly inspect heat exchangers and tubing for pitting, cracking, corrosion, erosion, weld integrity, and tube blockages, while minimizing downtime and optimizing planned maintenance.

In order to provide required level of quality control you need to establish proper processes and use correct equipment allowing to see inside about any piece of equipment or tubing, no matter how small the access port, without costly and time-consuming disassembly and teardown.
IT Concepts videoscopes and borescope cameras provide the high level of quality required to tough tubing inspection challenges. Whether the difficult stainless application for pharmaceutical processing with weld joints, the small passages for automotive fuel systems, aviation engine inspection with borescope guide tube(s) or long tubes inspection for blockage, the correct scope is essential.

IT Concepts has the solution by matching the proper rigid, flexible or video borescope (videoscope) with the correct diameter, length, viewing angle, double focus or double view with video and capture unit to check each equipment part.

Maintaining low repair costs is critical. It’s not unusual for videoscopes or borescopes to get damaged during intense tubing inspections. If one of our borescopes gets damaged, our repair and service prices typically run 50% less than the service prices of our competitors, and we can usually have the serviced unit back to you in 15 business days or even faster for urgent repairs.

Read more about IT Concepts videoscope, fiberscope, and borescope repair service.

  • Inspect hard to reach areas inside tubing quickly
  • Check the fit and placement of parts in processing equipment
  • Borescope weld inspection
  • Visualize areas in tubing without having to dismantle processing equipment
  • Quality control inspection for defects at the point of exploitation

Original pictures from the practice of different industries


Articulating Video Borescope Inspection of Tubing and Heat Exchangers

More Videoscopes for Tubing Inspection

Mobile, stationary, combinable & expandable, compact & modular
Explosion Proof Videoscope

Probe-ø: 4 - 6 mm
Working length: 1.5 - 7.5 m

Working Channel Compact Videoscope

Probe-ø: 4 - 6 mm
Working length: 1.5 - 7.5 m


Modular Videoscope
Probe-ø: 4 - 6 mm
Working length: 1.5 - 7.5 m


Compact Videoscope
Probe-ø: 4 - 6 mm
Working length: 1.5 - 7.5 m

All Products
All Videoscopes & Borescopes

With wide range of Probe-øs
And working lengths